Custom Silicone Divided Plate for Wholesale and Private Label Orders
We manufacture silicone divided plates that keep each portion separate through every stage of a meal so your customers get the same clean experience every time.
- Food-grade silicone free of BPA/ BPS/ PVC and phthalates
- Compartment walls built to keep flavors and sauces from mixing between sections
- Tested to LFGB /FDA and EN14372 across our silicone tableware line
- Custom mold development available for your own design
Silicone Divided Plate Specifications
A stainless steel insert build a pure silicone build and the option to develop your own design from scratch
Silicone Stainless Steel Divided Plate
This build pairs food-grade silicone with a 304 stainless steel insert across three compartments . It measures L232 by W232 by D30mm and weighs 273g, free of BPA, BPS, PVC, and phthalates.
MOQ:500 PCS
Normal Silicone Divided Plate
Built entirely from food-grade silicone at 75 Shore A hardness, this divided plate measures L200 by W200 by D30mm and holds 300mL across its compartments. It weighs 238g and is recommended for babies 6 months and up.
MOQ:500 PCS
Custom Mold Silicone Divided Plate
If neither standard build fits your product line, you can bring your own compartment layout or plate shape and our team will develop a new mold around your design, rather than working from a fixed template.
MOQ:500 PCS
Silicone Divided Plate Compartment Ratio Logic
The three compartments are not split into equal thirds. One section holds roughly 45 to 55 percent of total capacity, the other two about 20 to 28 percent each, matching how food volume actually varies at a meal. This is a plate divided by design, giving you a specific structural detail to stand behind when you position it against a simpler divided plate.
Separating the compartments also keeps wet and dry foods from running into each other, so a sauce or fruit juice stays contained instead of spreading into the main portion. You can carry this detail straight into your own product listings or packaging copy without needing to test or verify it yourself.
Silicone Divided Plate Food Separation Performance
A divided plate is used differently depending on where a child is in learning to eat. Early in self-feeding, keeping wet food separated from dry pieces means finger foods stay dry instead of picking up moisture from a neighboring sauce or puree, a detail worth building into your own product positioning.
When a new food is introduced, giving it its own compartment lets it sit apart from an already-familiar dish instead of mixing in from the first bite. This context gives you a way to speak to feeding stages directly in your own product copy, not just to the plate’s structure.
Keeps wet and dry foods apart
Supports introducing new foods separately
Holds steady when the plate is moved
A feature you can reference in your listings
Silicone Divided Plate Choosing Between the Two Variants
| Silicone Stainless Steel Divided Plate | Silicone Divided Plate | |
|---|---|---|
| Construction | Silicone body with a 304 stainless steel insert | Molded as a single piece of silicone |
| Cleaning | Insert and silicone body can be washed separately if needed | One piece, cleaned as a single unit with no parts to separate |
| Weight | 273g | 238g |
| Customization | Silicone color and logo can be customized; the insert follows its own standard finish | Full mold and color customization across the entire plate, including custom compartment layouts |
| Compliance | Covered under our LFGB, FDA, and EN14372 testing for silicone tableware | Covered under the same LFGB, FDA, and EN14372 testing for silicone tableware |
The insert build gives you a heavier, more premium feel suited to gift sets or a higher price tier, with the metal surface as a visible material distinction on the shelf. The single-material build is lighter for freight, carries one set of compliance documents instead of two, and gives you full control over the mold if you want a custom compartment shape.
Silicone Divided Plate Insert Replaceability
The stainless steel insert sits in a snap-fit rim rather than being fused permanently to the silicone body. This construction allows the insert to be removed on its own when it shows wear or damage, without requiring the entire plate to be replaced or discarded as a single unit.
A single insert can be resupplied on its own, separate from the silicone body around it. This is worth building into your own after-sales terms if you plan to offer replacement parts to your retail or gift-set customers, rather than handling every issue as a full plate return.
Silicone Divided Plate Manufacturing Standards and Order Consistency
Material and compliance standards for this plate follow the same requirements as the rest of our silicone tableware line, covered under LFGB, FDA, and EN14372 testing. Heat resistance runs from -40°C to 230°C, and the silicone body is dishwasher safe, consistent with every other silicone product we produce.
If you order the Silicone Stainless Steel Divided Plate and the Silicone Divided Plate together, color is checked against the same signed master sample across both, so the two products match in colorway even though they differ in construction and weight.
FAQs
Can I order a custom compartment layout instead of the standard one large and two small sections?
Can I request a sample of both builds before deciding which one to order?
Do the two builds require separate compliance documentation, or are they covered under the same certificates?
Is the compartment wall height the same across the stainless steel insert build and the single-material build?
If the stainless steel insert is damaged after the product has shipped to my customers, can replacement inserts be ordered separately?
Can this plate be combined with other products in your line to build a complete feeding set?
Start Your Cooperation With Us Today
Submit your target market and product needs and our team will help you choose the right divided plate and move straight to sample approval.