Custom Silicone Suction Bowls Manufacturer

We offer round, square, and silicone-stainless steel suction bowls for your baby feeding product line. You can customize colors, logos, packaging, and capacities. We provide material selection, suction cup base development, production control, quality inspection, and related third-party testing support.

Silicone Baby Suction Bowls

Silicone Suction Bowl Options

Choose from three silicone suction bowls for baby feeding, including two all-silicone designs and one silicone–stainless steel structure. Each suction bowl supports custom colors, logos, and packaging with an MOQ of 500 PCS.

Round Silicone Suction Bowl

This silicone suction bowl combines a round profile with an integrated suction base. Its 75° all-silicone structure maintains the bowl shape and provides a unified material option for bulk orders.

Square Silicone Suction Bowl

This silicone suction bowl uses rounded corners to create a distinct product shape while retaining a compact footprint. Its 380 mL capacity provides more volume than the round design.

Silicone & Stainless Steel Suction Bowl

This silicone suction bowl combines a SUS304 stainless steel interior with a 60° silicone exterior and suction base. It offers the largest capacity among the current suction bowls.

Need a Different Bowl Shape?

Send us your idea, drawing, or reference. We can develop a custom silicone suction bowl around your required shape, capacity, and material.

PRODUCTION specification

Compare Silicone Suction Bowl Structures

Compare the material structure, dimensions, capacity, hardness, and reference output of each available design before confirming your bulk order.

Product	Structure	Size	Weight	Capacity	Hardness	Reference Output
Round Silicone Suction Bowl	All-silicone	120 × 120 × 60 mm	135 g	350 mL	75 Shore A	2,000 PCS/day
Square Silicone Suction Bowl	All-silicone	120 × 120 × 60 mm	132 g	380 mL	75 Shore A	2,000 PCS/day
Silicone & Stainless Steel Suction Bowl	Silicone exterior with SUS304 interior	120 × 120 × 52 mm	142 g	400 mL	60 Shore A silicone	1,000 PCS/day

Start with the material structure. Select an all-silicone suction bowl for a unified material design, or the stainless steel option when your order requires a rigid SUS304 interior. You can then compare shape and capacity within the available silicone suction bowls.

PRODUCTION structure

Round Base Design for Our Silicone Suction Bowl Range

For our current silicone suction bowl range, we use a round suction-base structure. The upper bowl can vary in shape or material, while the underside maintains a continuous circular contact area.

During sample approval, you can test our silicone suction bowls on your intended smooth, non-porous surface before confirming bulk production.

material selection

Material Options for Your Silicone Suction Bowl

We currently manufacture both all-silicone and silicone–stainless steel structures. You can select the material according to your required food-contact surface, bowl rigidity, product weight, and overall appearance.

We mold the bowl body and round suction base as one piece using food-grade silicone. The current designs use 75 Shore A silicone to maintain the bowl shape while allowing the thinner base section to form a suction seal.

This structure gives you:

We combine a rigid SUS304 interior with a 60 Shore A silicone exterior and round suction base. The stainless steel interior provides the food-contact surface, while the silicone exterior controls the color, grip, and suction function.

We fit the stainless steel bowl into the silicone structure and check the connection for movement, gaps, and separation before production approval.

Customized Service

Customize Your Silicone Suction Bowl

You can customize an existing silicone suction bowl or provide your own drawing, reference product, and development requirements. We support color matching, logo application, mold development, and packaging coordination for your private-label or OEM project.

Custom Color

You can provide a Pantone reference or physical color sample. We prepare a pre-production sample for your approval and record the confirmed color standard to maintain consistency during bulk production and repeat orders.

Logo Application

You can choose printing or laser engraving based on the material and logo position. We confirm the size, placement, color, and finish through a pre-production sample before applying the approved logo standard to bulk production.

Shape and Mold Development

You can provide a drawing, reference product, or required capacity for new mold development. We evaluate the bowl dimensions, wall thickness, round suction base, and material structure before preparing the tooling design for your approval.

Packaging and Product Matching

You can choose an OPP bag, printed box, or custom packaging based on your artwork. If you need a silicone suction bowl and spoon set, we can also coordinate the spoon, bowl color, logo, and packaging.

strict process to Manufacture

How We Produce Your Silicone Suction Bowl

We turn your approved sample into clear production standards for color, structure, dimensions, and delivery. This allows us to maintain the confirmed specifications throughout bulk production and future repeat orders.

Quality Inspection

Quality Inspection Methods for Your Silicone Suction Bowl

We inspect your order using measuring tools, approved specifications, and confirmed samples. Each result is compared with the acceptance requirements agreed with you before bulk production.

Dimension and Material Inspection

We use calipers to measure the bowl size, wall dimensions, and suction-base diameter. We check product weight with an electronic scale, capacity with measured water, and silicone hardness with a Shore A durometer. This confirms that your order matches the approved product specifications.

Suction Base Inspection

We place the silicone suction bowl on a smooth glass inspection surface and check whether the circular base makes complete contact. We also inspect the underside for warping, uneven edges, rocking, and visible gaps that could affect the suction seal.

Composite Connection Inspection

For silicone and SUS304 suction bowls, we inspect the alignment and connection between both materials. We use manual rotation and pulling checks to identify movement, gaps, loosening, or separation before the products proceed to packaging.

Custom Detail Inspection

We compare the finished color with your approved sample under consistent lighting. We measure the logo size and position against the confirmed artwork, then check the packaging material, printing, and product placement against your approved packaging sample.

Quality certificates

Testing Support for Your Silicone Suction Bowl

We provide existing third-party test reports to support your product and material review. Before you place an order, we check whether the selected silicone suction bowl falls within the scope of the available reports.

FDA Food-Contact Testing

Our current report covers total extractives under U.S. FDA 21 CFR 177.2600. The submitted silicone baby tableware samples received a PASS result for the tested food-contact material requirements.

LFGB Food-Contact Testing

Our LFGB report covers sensory evaluation, lead and cadmium, color migration, volatile organic matter, and other tested items. The submitted silicone tableware samples received PASS results under the referenced test requirements.

EN 14372 Testing

Our existing EN 14372:2004 report covers general and mechanical requirements, element migration, volatile compounds, formaldehyde, lead, cadmium, phthalates, and BPA. The submitted feeding utensil samples received PASS results.

Report Scope Confirmation

Existing reports apply to the materials and samples submitted for testing. If your suction bowl uses a new material formula, structure, or custom design outside the current report scope, we can coordinate additional third-party testing according to your target requirements.

FAQs

Can one mold produce suction bowls with different capacities?

Changing the capacity usually changes the bowl depth, inner contour, or external dimensions. Because the bowl body and suction base form one molded structure, a significant capacity change normally requires a new mold. If the external dimensions remain unchanged, we can evaluate whether adjusting the internal mold component is technically feasible before confirming the tooling solution.

Can you add capacity markings inside the bowl?

We can evaluate raised or recessed capacity markings during mold development. You can specify the required units, values, position, and marking size. We review their readability, depth, and effect on the bowl wall before adding them to the tooling design. Because molded markings form part of the mold structure, they should be confirmed before tooling production begins.

Can I change the logo without modifying the product mold?

Printed and laser-engraved logos can usually be changed by updating the approved artwork and processing instructions. An embossed or recessed logo formed directly during molding becomes part of the tooling structure. Changing that type of logo may require a replaceable insert or mold modification. We recommend confirming your preferred logo method before the mold design is finalized.

Can I add a matching lid to an existing silicone suction bowl?

A matching lid requires an accurate fit with the bowl rim. We need to review the rim diameter, edge profile, sealing method, and required lid material before development. If the existing rim was not designed for a lid, the bowl mold may also need adjustment. We confirm the bowl and lid structure together before preparing the final tooling drawing.

Can you review my bowl concept before I invest in tooling?

You can provide a sketch, reference product, target capacity, or basic dimensional requirements. We review the bowl wall, rim, round suction base, material structure, demolding direction, and manufacturing feasibility before tooling begins. This allows you to identify structural changes early and approve a practical silicone suction bowl design before committing to mold production.

Can the mold be modified after the first product sample?

Some small changes may be completed through local mold adjustment or replacement of a removable mold insert. Changes involving the bowl size, capacity, wall structure, or suction-base dimensions may require larger tooling modifications or a new mold. We review the requested revision and explain its impact on cost, product structure, and development time before proceeding.

Start Your Silicone Suction Bowl Project

Send us your required structure, quantity, customization, and packaging details. We will prepare a practical sourcing proposal for your project.

Silicone Bib