Baby Silicone Plates Engineered for Brand and Wholesale
We manufacture food grade silicone plates for baby feeding programs worldwide. From suction plates to divided plates, you get consistent material quality, verified compliance documentation, and production capacity built for repeat orders at brand and wholesale scale.
- Food grade silicone free of BPA/BPS/PVC and phthalates
- Tested to LFGB/FDA and EN14372 food contact standards
- Hardness calibrated to each plate structure and function
- Batch color consistency controlled from compounding to shipment
Silicone Plate Structures for Different Program Needs
Our silicone plate range covers multi structural directions: one-piece molded silicone suction plates, divided plates built with a stainless steel insert, and normal silicone plates without suction or compartments,even design by yourself.
Molded as a single piece of food grade silicone with no joints or bonded parts, the suction plate holds a single open compartment and stays anchored to the table through its suction base during feeding. The one-piece structure removes assembly seams from the cleaning routine and keeps the plate dishwasher ready for daily commercial use.
Built with a food grade silicone body and a 304 stainless steel insert, the divided plate separates portions across three compartments while the silicone rim secures the insert through a snap-fit structure. The suction base keeps the plate in place, and the steel insert lifts out for separate cleaning.
Normal Silicone Plate
Designed as an open plate without compartments or a suction base, the normal silicone plate comes in two constructions: fully molded food grade silicone, or a silicone body fitted with a stainless steel insert. The flat open format serves feeding programs that call for a simple plate profile across table settings.
Each structure serves a different position in your baby plates assortment. Full specifications, molding details, and customization scope are available on each product page.
Food Grade Silicone Specified for Every Plate in the Range
Every silicone food plate we produce starts from food grade silicone free of BPA BPS PVC and phthalates, with hardness documented per product so you can match each plate structure to your program requirements.
Our one-piece molded silicone plate is produced at 75 Shore A. Our silicone and stainless steel divided plate carries a silicone body at 60 Shore A. Both figures are fixed in the product specification and held consistent across production batches, so the plates you receive from a repeat order match the firmness of the sample you approved.
The silicone body withstands temperatures from -40°C to 230°C, which keeps food grade silicone plates stable through dishwasher cycles, sterilization, and freezer storage in daily commercial use. When your compliance team reviews material composition, we support the review with food contact test documentation covering LFGB, FDA, and EN14372 requirements, detailed further in our compliance section.
Silicone Plate Structures Built Around Feeding Function
Each structure in our silicone plate range is molded around a specific feeding function: the suction base anchors the plate through mealtime, and the divided layout separates portions across fixed compartments.
bottom of Silicone suction Plate
The suction base holds the plate firmly in place on the table surface to help prevent spills during feeding. On the one-piece suction plate, the base is molded as part of the plate body itself, with no bonded seams between the base and the plate wall. This single-mold construction is what allows the plate to pass through dishwasher cycles without joints that trap residue.
Divided eating areas of Silicone Plate
The divided plate carries three compartments at 106mL, 50mL, and 50mL, holding a main portion and two sides in fixed positions on one plate. The 304 stainless steel insert forms the compartment surface, and the silicone rim secures it through a snap-fit structure while allowing the insert to lift out for separate cleaning.
depth and capacity of Silicone Plate
Plate depth across the range corresponds to capacity. The one-piece silicone plate is molded at 30mm depth carrying 300mL, and the silicone and stainless steel plate is built at a 15mm profile. Depth in our range maps to portion volume, which lets you position each plate against the serving sizes your market calls for.
Color Consistency Held From Sampling to Mass Production
Color on baby silicone plates is a repeat-order commitment: the shade you approve at sampling is the shade we reproduce in every following production run.
Recorded at sampling
When your sample is produced, we record the exact material and colorant ratios used in that batch. These ratios become the fixed reference for your product, held on file rather than re-mixed by estimation at each order.
Verified by instrument
Color output is checked with a spectrophotometer and supporting instruments, measuring the produced color against the recorded reference instead of relying on visual judgment alone.
Reproduced in mass production
When your order moves to mass production, compounding follows the retained sampling records. The formula that produced your approved sample is the formula that runs your bulk order, which is how the plates in your third shipment match the plates in your first.
Silicone Plates Built Into Single SKUs Feeding Sets and Gift Boxes
Our silicone plates slot into three sourcing formats: standalone SKUs, multi-piece feeding sets, and gift box combinations, all drawn from one silicone product range produced under one roof.
Standalone Silicone Plate SKUs
You can source any plate in the range as an independent SKU. Baby food plates in our line share the same food grade silicone base and the same color range across structures, so a single-item order today still aligns with the set or assortment you may build next season.
Feeding Set Combinations
Our plates combine with bibs, suction bowls, straw cups, spoons, and forks into feeding sets, with configurations already produced at 5, 6, and 8 pieces. Set items share unified colors across pieces, which gives your assortment one coherent look on shelf instead of a mix of near-matching tones.
Silicone Feeding Gift Set Box Combinations
For gift programs, plates combine with matching feeding items into boxed sets. We coordinate the product combination and the packaging in one place, so the box, the insert, and the products inside move through one production plan and one quality check before shipment.
Silicone Plates Tested to LFGB FDA and EN14372 Standards
Our silicone plates for babies are tested by accredited third-party laboratories against LFGB, FDA 21 CFR 177.2600, and EN14372. Together these cover food contact migration, sensory evaluation, volatile organic matter, mechanical safety for child feeding utensils, and REACH restrictions on lead, cadmium, phthalates, and BPA across the European and US markets.
Test reports are available for your compliance review during sourcing evaluation. When your target market calls for documentation beyond these standards, we coordinate additional third-party testing based on your requirements, so your import clearance and retailer audits move on complete files rather than pending paperwork.
Silicone Plate Production Backed by a 50000 Square Meter Factory
Behind every silicone plate order stands a manufacturing base built over 26+ years, running specialized silicone production lines under one roof.
- 28+ years of experience in baby feeding product design, R&D, mold development, and manufacturing
- 50,000 m² integrated manufacturing base with 30,000 m² of warehousing capacity
- 100,000+ sets daily production capacity and 47+ million sets annual production capacity
- 300+ production machines, including 120 injection molding machines and 50 silicone processing machines
- 40+ mold-making machines in our in-house mold center, including CNC, EDM, grinding, milling, and measuring equipment
- 100+ technical professionals, including 20+ R&D specialists in design, engineering, molds, production, and quality control
- 40+ testing instruments in our professional in-house laboratory for material, performance, and quality testing
- 1,000+ utility model and design patents, supporting continuous product development and innovation
- Integrated in-house capabilities covering R&D, mold making, production, printing, testing, packaging, and warehousing
Silicone Plate Customization From Color to Gift Box
We run OEM and ODM programs on silicone plates, with customization scoped across four levels so you can match the depth of development to the stage of your brand.
Color Customization
Your brand colors are matched at the sampling stage, where material and colorant ratios are recorded as your fixed color reference. Every following production run compounds from that record, so the shade on your shelf stays the shade in your brand guide.
Logo Customization
Your logo is applied to the plate body through molded or printed marking, supported by our in-house screen printing, pad printing, and heat transfer lines. Keeping marking in-house means logo placement is confirmed on the actual product during sampling, not outsourced after.
Packaging and Gift Box
Packaging is developed alongside the product, from single-SKU retail boxes to multi-piece gift sets. You confirm the plate, the box, and the insert as one sample package, and the combination ships as one quality-checked unit.
Mold Development
For designs beyond our existing range, our in-house mold center takes your product from drawing to tooling with 40+ mold-making machines including CNC equipment. New structures, new sizes, and new compartment layouts are built as your proprietary molds.
Silicone Plate Development From Brief to Approved Sample
New silicone plate development runs through a fixed sequence of confirmation points, so you always know which stage your project stands at and what gets locked before the next step begins.
Requirement Briefing
You share your target market, product direction, and reference requirements. We respond with structure, material, and combination recommendations drawn from our existing silicone plate range and tooling capability.
Design and Engineering
Our industrial design and structural design team converts the confirmed direction into product drawings, covering dimensions, capacity, hardness specification, and marking positions for your review.
Mold and Sampling
Confirmed drawings move to our in-house mold center for tooling, and samples are produced on the same machines that will run your bulk order. Material and colorant ratios are recorded at this stage as your production reference.
Sample Confirmation
You review the physical sample against the confirmed drawings. Your approved sample closes the development stage and becomes the reference for commercial confirmation.
Silicone Plate Orders From Confirmation to Shipment
Once your sample is approved, your silicone plate order moves through a staged delivery sequence, with each stage closed by a defined check before the next begins.
Commercial Confirmation
Quotation, order quantity, color assortment, packaging format, and delivery terms are confirmed and documented. Your approved sample and its recorded material and colorant ratios are filed as the fixed production reference for this and every following order.
Bulk Production and In-Process Inspection
Bulk production runs on the machines that produced your sample, compounding from the retained sampling records. In-process checks run alongside production in our in-house laboratory equipped with 40+ testing instruments.
Packing and Shipment
Packing follows the confirmed packaging format through our assembly and packing department. Your order ships with its documentation package, and the filed production reference stays on record for your repeat orders.
FAQs
Can we put our own brand on plates from your existing molds?
Can we start with your existing colors instead of custom matching?
Can my plates from an older order be matched years later?
Do you supply test reports under our company name or yours?
If we develop a proprietary mold with you, who holds the mold?
What information should we prepare before requesting a quotation on baby food plates?
Start Your Silicone Plate Program With HUROYAL
Send us your product design, reference images, or sample details, and we respond with a complete proposal.